Help please with unresponsive FSSB R3
Posted: Wed Jan 05, 2022 10:54 am
Hi there, hoping to reach @Dragon or @Shark...
WEBSITE NOW WORKING IGNORE: FYI, the RealSimulator website is replying with the following (using a normal browser, private session and then vpn and private session to another country):
so I have headed over to the forums.
After taking some time off flying to do more racing sims, I am reasembling my flight hardware, including my FSSB R3, FSSB R3 lightening and TUSBA R2 which have been packed away and stored safely. All was going well until I plugged in the FSSB R3. Not a sausage. No chirp. No USB plugged in dingle from the OS. Nada.
Here is what I have checked so far:
However, having swapped in my F18CGH to the base, the initialisation leds on the grip lit up - so some power is getting through.
My guess is the usb controller has died, but I guess as per suggestions in other threads that the board/processor could have a problem. Hopefully not!
Look forward to hearing back!
Cheers
Chris
WEBSITE NOW WORKING IGNORE: FYI, the RealSimulator website is replying with the following (using a normal browser, private session and then vpn and private session to another country):
Code: Select all
Too Many Requests
The user has sent too many requests in a given amount of time.
After taking some time off flying to do more racing sims, I am reasembling my flight hardware, including my FSSB R3, FSSB R3 lightening and TUSBA R2 which have been packed away and stored safely. All was going well until I plugged in the FSSB R3. Not a sausage. No chirp. No USB plugged in dingle from the OS. Nada.
Here is what I have checked so far:
- Checked the device manager
- Plugged directly into PC
- Switched to cable from other working FSSB R3 Lightening
- Repeated the above on another computer
However, having swapped in my F18CGH to the base, the initialisation leds on the grip lit up - so some power is getting through.
My guess is the usb controller has died, but I guess as per suggestions in other threads that the board/processor could have a problem. Hopefully not!
Look forward to hearing back!
Cheers
Chris