Hello I have a litte wired issue. After I plug in the grip to the base it instantly starts to rund the vibration of the stick Anyone a idea how to disable that feature? I don`t need it at all.
On my TM base that does not happen, but when plugged into my FCC3 base ist starts
PS: I know there are Force Sensors from RS too, but they all do not fit a 1:1 pit, all are ways to big and just good for desktop use.
Grip vibrates after connection.
-
- Posts: 3
- Joined: Wed Mar 29, 2023 6:12 pm
- Product: F16SGRH
- S/N: 521
-
- Posts: 137
- Joined: Thu Jan 10, 2013 1:44 pm
- Product: ---
- S/N: 0
Re: Grip vibrates after connection.
Hi Ronal,
Looks like the FCC3 comms signals are not fully compatible with the TM grips. Any case, if you won't use the grip with a RS base then the only way to disable the vibration due to this incompatibility is unplug the vibrator from the control board of F16SGRH. To do it, unscrew the 4 screws that fix the top cover and unplug the 2 way connector with a red and black wires.
Regards,
Looks like the FCC3 comms signals are not fully compatible with the TM grips. Any case, if you won't use the grip with a RS base then the only way to disable the vibration due to this incompatibility is unplug the vibrator from the control board of F16SGRH. To do it, unscrew the 4 screws that fix the top cover and unplug the 2 way connector with a red and black wires.
Regards,
-
- Posts: 3
- Joined: Wed Mar 29, 2023 6:12 pm
- Product: F16SGRH
- S/N: 521
Re: Grip vibrates after connection.
Thanks That helped. Vibration is off....
But it seems that the grip is not compatible with FCC3 Most of the buttons are not noticed (DMS, TMS, TRIM, NSL, Paddle, CMS), and on other buttons (for example Pickle) windows shows 3 buttons pressed at the same time The Warthog Grip, Cougar Gripo, Hornet Grip.. they all work fine with it. The RS stuff does not
Maybe I can figure it out in any way (i dont use all those additional stuff) and other whise... don´t know. 500€ as education.. or waiting until a usable force sensor from RS is on the market. But I can tell others who wanted to get it for their pits not to buy. That`s saving money for them
I mean.. how hard can it be, a small group of enthusiasts developed that FCC stuff nearly 20 years ago...
But it seems that the grip is not compatible with FCC3 Most of the buttons are not noticed (DMS, TMS, TRIM, NSL, Paddle, CMS), and on other buttons (for example Pickle) windows shows 3 buttons pressed at the same time The Warthog Grip, Cougar Gripo, Hornet Grip.. they all work fine with it. The RS stuff does not
Maybe I can figure it out in any way (i dont use all those additional stuff) and other whise... don´t know. 500€ as education.. or waiting until a usable force sensor from RS is on the market. But I can tell others who wanted to get it for their pits not to buy. That`s saving money for them
I mean.. how hard can it be, a small group of enthusiasts developed that FCC stuff nearly 20 years ago...